Главная/
Каталог запчастей/
B/
BRIGGS & STRATTON/
Двигатели/
Горизонтальные двигатели/
256400 (Type 0004 - 1211) до кода 02073000
256400 (Type 0004 - 1211) до кода 02073000
| П-п | Арт | Название |
|---|---|---|
| 1 | Cylinder Assembly | |
| 2 | Kit-Bushing/Seal (Magneto Side) | |
| 3 | Seal-Oil (Magneto Side) | |
| 5 | Head-Cylinder | |
| 6 | Washer (Cylinder Head) Used on Type No(s). 0140,1140. | |
| 7 | Gasket-Cylinder Head | |
| 8 | Breather Assembly | |
| 9 | Gasket-Breather | |
| 10 | Screw (Breather Assembly) | |
| 11 | Tube-Breather (Used After Code Date 95010100). | |
| 12 | Gasket-Crankcase (015\\\" Thick) (Standard) | |
| 13 | Screw (Cylinder Head) | |
| 14 | Stud (Cylinder Head) | |
| 15 | Plug-Oil Drain | |
| 15A | Plug-Oil Drain (Flush) | |
| 16 | Crankshaft | |
| 18 | Cover-Crankcase | |
| 19 | Kit-Bushing/Seal (PTO Side) | |
| 20 | Seal-Oil (PTO Side) | |
| 21 | Cap-Oil Fill | |
| 22 | Screw (Crankcase Cover/ Sump) | |
| 22A | Screw (Crankcase Cover/ Sump) (2 1/8\\\" Long) | |
| 23 | Flywheel | |
| 23A | Flywheel | |
| 24 | Key-Flywheel | |
| 25 | Piston Assembly (Standard) | |
| 26 | Ring Set (Standard) | |
| 27 | Lock-Piston Pin (Used After Code Date 95101500). | |
| 28 | Pin-Piston (Standard) (Used After Code Date 95101500). | |
| 29 | Rod-Connecting (Standard) | |
| 30 | Dipper-Connecting Rod (Used After Code Date 99091900). | |
| 32 | Screw (Connecting Rod) (1 7/8” Long) | |
| 32A | Screw (Connecting Rod) (1 5/8” Long) | |
| 33 | Valve-Exhaust | |
| 34 | Valve-lntake | |
| 35 | Spring-Valve (Intake) | |
| 36 | Spring-Valve (Exhaust) | |
| 37 | Guard-Flywheel | |
| 37A | Guard-Flywheel | |
| 40 | Retainer-Valve (1 Piece) | |
| 40A | Retainer-Valve | |
| 40 B | Retainer-Valve | |
| 42 | Keeper-Valve (2 Piece) | |
| 44 | Screw (Counterweight Retainer) | |
| 45 | Tappet-Valve | |
| 46 | Camshaft | |
| 50 | Manifold-lntake | |
| 51 | Gasket-lntake (Carburetor to Manifold) | |
| 51A | Gasket-lntake (Manifold to Engine) | |
| 53 | Stud (Carburetor) | |
| 54 | Screw (Intake Manifold) | |
| 55 | Housing-Rewind Starter (Used After Code Date 98111500). | |
| 55A |  |
Housing-Rewind Starter (Used Before Code Date 98111600). |
| 56 |  |
Pulley-Starter (Includes 63” Rope) (Used Before Code Date 98111600). |
| 57 |  |
Spring-Rewind Starter (Used Before Code Date 98111600). |
| 58 |  |
Rope-Starter (63” Long) |
| 58A |  |
Rope-Starter (99” Long) |
| 59 |  |
Insert-Grip |
| 60 |  |
Grip-Starter Rope |
| 63 |  |
Spring-Ratchet |
| 64 |  |
Adapter-Ratchet Spring |
| 65 |  |
Screw (Rewind Starter) |
| 66 |  |
Clutch-Starter (Used Before Code Date 99030100). |
| 67 |  |
Housing-Clutch |
| 68 |  |
Ball-Clutch |
| 70 |  |
Ratchet-Clutch |
| 71 |  |
Cover-Ratchet |
| 73 |  |
Screen-Rotating |
| 73A |  |
Screen-Rotating |
| 73B |  |
Screen-Rotating |
| 73C |  |
Screen-Rotating (Used with 99” Rope) |
| 74A |  |
Screw (Rotating Screen) |
| 75 |  |
Washer (Flywheel) |
| 78 |  |
Screw (Flywheel Guard) |
| 78A |  |
Screw (Flywheel Guard) |
| 79 |  |
Case-Gear Reduction |
| 80 |  |
Gasket-Gear Case |
| 81 |  |
Lock-Muffler Screw |
| 82 |  |
Screw (Gear Reduction Case |
| 83 |  |
Shaft-Auxiliary Drive |
| 84 |  |
Plug-Breather |
| 85 |  |
Screw (Gear Cover To Gear Reduction Case) |
| 86 |  |
Cover-Gear |
| 87 |  |
Seal-Gear Reduction |
| 88 |  |
Gasket-Gear Reduction Cover |
| 89 |  |
Plug-Oil |
| 89B |  |
Plug-Oil |
| 93 |  |
Bushing-Throttle Shaft |
| 94 |  |
Kit-Idle Mixture |
| 94A |  |
Kit-Idle Mixture (Used on LMT 175) |
| 95 |  |
Screw (Throttle Valve) |
| 98 |  |
Kit-Idle Speed |
| 98A |  |
Kit-Idle Speed |
| 104 |  |
Pin-Float Hinge |
| 105 |  |
Valve-Float Needle |
| 106 |  |
Seat-lnlet |
| 108 |  |
Valve-Choke |
| 121 |  |
Kit-Carburetor Overhaul |
| 125 |  |
Carburetor |
| 127 |  |
Plug-Welch (Used After Code Date 00030900). |
| 130 |  |
Vaive-Throttle |
| 131 |  |
Kit-Throttle Shaft |
| 133 |  |
Float-Carburetor |
| 137 |  |
Gasket-Float Bowl |
| 141 |  |
Kit-Choke Shaft |
| 142 |  |
Nozzle-Carburetor (Standard) (Used on LMT 101, 175,176) (Used After Code Date 00030900). |
| 143 |  |
Nozzle-Carburetor (High Altitude) (Used on LMT 101, 175,176) (Used After Code Date 00030900). |
| 146 |  |
Key-Timing (OIL GARD |
| 147 |  |
Jet-Pilot (Used on LMT 101) |
| 152 |  |
Retainer- Counterweight |
| 161 |  |
Base-Air Cleaner (Metal) |
| 163 |  |
Gasket-Air Cleaner |
| 170 |  |
Stud (Crankcase Cover/ Sump) |
| 179 |  |
Screw (Fuel Tank Strap) |
| 180 |  |
Tank-Fuel (Metal) |
| 181 |  |
Cap-Fuel Tank (Metal) |
| 182 |  |
Bracket-Fuel Tank (Metal Fuel Tank) |
| 182A |  |
Bracket-Fuel Tank (Top) Used on Type No(s). 0515,1006,1008, 1012,1015,1020, 1029,1049,1050, 1070,1072,1139, 1154,1161,1174, 1195,1196,1203, 1205,1210. |
| 182B |  |
Bracket-Fuel Tank (Top) Used on Type No(s). 1101,1130,1137, 1138,1140. |
| 182D |  |
Bracket-Fuel Tank (Bottom) Used on Type No(s). 1101,1130,1137, 1138,1140. |
| 182E |  |
Bracket-Fuel Tank (Bottom) Used on Type No(s). 0140, 0515, 1006, 1008, 1012, 1015, 1020, 1029, 1049, 1050, 1070, 1072, 1139,1140,1154, 1161,1174, 1195, 1196,1203,1205, 1210. |
| 183 |  |
Fuel Tank Strap |
| 186 |  |
Connector-Hose |
| 186A |  |
Connector-Hose |
| 187 |  |
Line-Fuel (Cut to Required Length) |
| 187A |  |
Line-Fuel (Molded) |
| 187B |  |
Line-Fuel |
| 187C |  |
Line-Fuel |
| 188 |  |
Screw (Control Bracket) |
| 199A |  |
Valve-Fuel Shut Off (Metal) |
| 209 |  |
Spring-Govemor (Used After Code Date 97042700). |
| 209A |  |
Spring-Govemor (Used Before Code Date 97042800). |
| 209C |  |
Spring-Govemor Used on Type No(s). 0121. |
| 211 |  |
Spring-Governed Idle (Used After Code Date 97042700). |
| 212 |  |
Link-Throttle (Upper) |
| 212 A |  |
Link-Throttle (Lower) |
| 219 |  |
Gear-Govemor |
| 220 |  |
Washer (Governor Gear) |
| 222 |  |
Bracket-Control (Used After Code Date 97042700). |
| 222B | Bracket-Control Used on Type No(s). 1004,1006,1007, 1008,1070,1132, 1133,1134, 1135, 1136,1153, 1154, 1162,1177, 1198, 1204. | |
| 227 | Lever-Govemor Control | |
| 232 | Spring-Govemor Link | |
| 240 | Filter-Fuel | |
| 240A | Filter-Fuel | |
| 244 | Washer (Gear Reduction Case | |
| 257 | Screw (Starter Clutch) | |
| 265 | Clamp-Casing | |
| 267 | Screw (Casing Clamp) | |
| 268 | Casing-Control Wire (Cut to Required Length) | |
| 269 | Wire-Control (Cut to Required Length) | |
| 270 | Nut (Control Wire Casing) | |
| 271 | Lever-Control (Magneto Armature) | |
| 272 | Lock-Screw Head (Gear Reduction Case) | |
| 276 | Washer-Sealing | |
| 276A | Washer-Sealing | |
| 277 | Washer (Gear Case to Gear Reduction Cover) | |
| 298 | Locknut-M uffler/Elbow | |
| 300 | Muffler | |
| 300A | Muffler | |
| 301 | Pipe-Exhaust | |
| 304 | Housing-Blower (Red) | |
| 305 | Screw (Blower Housing) | |
| 306 | Shield-Cylinder | |
| 307 | Screw (Cylinder Shield) | |
| 308 | Cover-Cylinder Head | |
| 309 | Motor-Starter (3 5/8\\\" Housing Length) | |
| 309A | Motor-Starter For Replacement Starter Motor, Order Ref 309. | |
| 310 | Screw (Starter Motor) (3 5/8\\\" Housing Length) | |
| 311 | Brush Set | |
| 311A | Brush Set (For 3 5/8\\\" and 4 3/8\\\" Housing Lengths) | |
| 325 | Pulley-Rope Starter | |
| 332A | Nut (Flywheel) | |
| 333 | Armature-Magneto | |
| 334 | Screw (Magneto Armature) | |
| 337 | Plug Spark | |
| 346 | Screw (Spark Arrestor) | |
| 347 | Switch-Rocker | |
| 349 | Nut (Cylinder Head Cover) | |
| 355 | Washer (Muffler Bracket) | |
| 356 | Wire-Stop (1 Wire, 4\\\" Long)(Snap Connect Insulated Ring Terminal, And Bare Wire End) | |
| 356B | Wire-Stop (2 Wires, 5-33/64\\\" And 15-23/32\\\" Long)(Snap Connect Insulated Female Blade Terminal, And 2 Push-On Female Blade Terminals) | |
| 356C | Wire-Stop (1 Wire, 17-13/64\\\" Long)(Snap Connect Insulated Female Blade Terminal, And Push-On Female Blade Terminal) Used on Type No(s). 1139. | |
| 356D | Wire-Stop (1 Wire, 7-1/4\\\" Long)(Ring Terminal, And Snap Connect Insulated Pin Socket) | |
| 358 | Gasket Set-Engine | |
| 359 | Washer (Ground Terminal) | |
| 363 | Puller-Flywheel | |
| 366 | Screw (Timing Hole Plug) | |
| 373 | Nut (Ground Terminal) | |
| 383 | Wrench-Spark Plug | |
| 385 | Screw (Fuel Pump) | |
| 387 | Pump-Fuel | |
| 404 | Washer (Governor Crank) | |
| 412 | Nut (Air Cleaner Cover) | |
| 415A | Plug | |
| 425 | Screw (Air Cleaner Cover) | |
| 427 | Nut (Control Bracket) | |
| 428 | Nut (OIL GARD® Kit) | |
| 441 | Bracket-Oil Fill | |
| 445 | Filter-Air Cleaner Cartridge | |
| 449 | Screw (Oil Fill Bracket) | |
| 455 | Cup-Flywheel | |
| 455A | Cup-Flywheel | |
| 455B | Cup-Flywheel (Used with 99\\\" Rope) | |
| 456 | Plate-Pawl Friction | |
| 459 | Pawl-Ratchet | |
| 462 | Washer (Starter Cable) | |
| 464 | Seal-O Ring (Fuel Shut Off Valve) | |
| 474 | Alternator | |
| 474A | Alternator | |
| 474B | Alternator | |
| 474C | Alternator | |
| 478 | Panel | |
| 485 | Knob-Control | |
| 489 | Screw (Linkage Lever) | |
| 493 | Bracket-Mounting | |
| 501 | Regulator (16 Amp Regulated) | |
| 501A | Regulator (9 Amp Regulated) | |
| 503 | Strap-Starter | |
| 504 | Washer Set-Friction | |
| 505 | Nut (Governor Control Lever) | |
| 507 | Insulator | |
| 510 | Drive-Starter | |
| 510A | Drive-Starter | |
| 513 | Clutch-Drive | |
| 520 | Terminal-Ground | |
| 523 | Dipstick | |
| 524 | Seal-Dipstick Tube | |
| 525 | Tube-Dipstick | |
| 526 | Screw (Regulator) (5/8” Length) | |
| 526A | Screw (Regulator) (1 1/4” Length) | |
| 544 | Armature-Starter (3 5/8” Housing Length) | |
| 544A | Armature-Starter (3 5/8 ” Housing Length) | |
| 552 | Bushing-Govemor Crank | |
| 562 | Bolt (Governor Control Lever) | |
| 575 | Switch-Starting | |
| 577 | Cable-Starter | |
| 578A | Wire Assembly (1 Wire, 23” Long)(ln-sulated-Support Ring Terminal, And Push-On Insulated-Support Female Blade Terminal) | |
| 578B | Hamess-Altemator (1 Wire, 48-1/2” Long)(Snap Connect Female Pin Socket, And Bare Wire End) | |
| 579 | Nut (Starter Cable) | |
| 579A | Nut (Starter Cable) | |
| 592 | Nut (Rewind Starter) | |
| 594 | Screw (Rope Starter Pulley) | |
| 597 | Screw (Pawl Friction Plate) | |
| 601 | Clamp-Hose | |
| 608 | Starter-Rewind (63” Length Rope) (Used After Code Date 98111500). | |
| 608A | Starter-Rewind (Used Before Code Date 98111600). | |
| 613 | Screw (Muffler) | |
| 613A | Screw (Muffler) | |
| 613B | Screw (Muffler) | |
| 614 | Pin-Cotter | |
| 616 | Crank-Govemor | |
| 621 | Switch-Stop | |
| 624 | Lever-Linkage | |
| 634 | Spring/Seal Assembly | |
| 635 | Boot-Spark Plug | |
| 636 | Nut (Starting Switch) | |
| 641 | Washer (Starting Switch) (Lock) | |
| 641A | Washer (Starting Switch) (Flat Washer) | |
| 643 | Retainer-Air Filter | |
| 654 | Nut (Carburetor) | |
| 655 | Anchor-Rewind Spring | |
| 668 | Spacer | |
| 674 | Screw (Fuel Tank Bracket) | |
| 674A | Screw (Fuel Tank Bracket) | |
| 676 | Deflector-Muffler | |
| 676A | Deflector-Muffler | |
| 677 | Screw (Muffler Deflector) | |
| 678 | Spacer-Rewind | |
| 689 | Spring-Friction | |
| 691 | Seal-Govemor Shaft | |
| 697 | Screw (Drive Cap) | |
| 697A | Screw (Drive Cap) | |
| 707 | Nut (Fuel Tank Strap) | |
| 725 | Shield-Heat | |
| 726 | Gear-Ring (Aluminum) | |
| 727 | Cover-Starter Drive | |
| 729C | Clip-Wire | |
| 732 | Screw (Starter Drive Cover) | |
| 741 | Gear-Timing | |
| 758 | Counterweight | |
| 775 | Nut (Toggle Switch) | |
| 783 | Gear-Pinion | |
| 789A | Hamess-Winng Used on Type No(s). 0012, 0015, 0020, 0025, 0026, 0027, 0028, 0111,0113, 0115,0121,0135, 0139, 0140, 0156, 0173, 0512, 0515, 0525, 0527, 0528, 0635, 0660, 0661, 0695, 0696, 1012, 1015, 1020, 1025, 1027, 1028, 1029, 1049, 1050, 1121, 1135,1140,1156, 1161,1195, 1205, 1210. | |
| 789B | Hamess-Winng | |
| 795 | Switch-Toggle | |
| 797 | Nut (Brush Retainer) | |
| 797B | Nut (Brush Retainer) | |
| 801 | Cap-Drive | |
| 802A | Cap-End (3 5/8” Housing Length) | |
| 803 | Housing-Starter (3 5/8” Housing Length) | |
| 803A | Housing-Starter (3 5/8” Housing Length) | |
| 813 | Clamp | |
| 819 | Screw (Muffler Bracket) | |
| 823 | Screw (Muffler Adaptor) | |
| 832 | Guard-Muffler | |
| 836 | Screw (Muffler Guard) (9/16” Long) | |
| 836A | Screw (Muffler Guard) (7/16” Long) | |
| 840 | Kit-Panel | |
| 842 | Seal-0 Ring (Dipstick Tube) | |
| 843 | Sleeve-Lever | |
| 847 | Dipstick/Tube Assembly | |
| 851 | Terminal-Spark Plug | |
| 863 | Bracket-Muffler | |
| 864 | Adapter-Muffler | |
| 868 | Seal-Valve | |
| 869 | Seat-Valve (Intake) | |
| 870 |  |
Seat-Valve (Exhaust) |
| 871 |  |
Bushing-Valve Guide (Exhaust) |
| 876 |  |
Kit-Pinion Spring |
| 877 |  |
Wire/Connector- Alternator |
| 877A |  |
Wire/Connector- Alternator |
| 877B |  |
Wire/Connector-Alternator (2 Wires, 7-53/64” Long)(2 Bare Wire Ends, And Insulated Snap Connect Male Pin Terminal) |
| 877C |  |
Wire/Connector- Alternator |
| 878 |  |
Harness-Altemator (2 Wires, 48-1/2\\\", And 48-1/2” Long)(Snap Connect Female Pin Terminal, And 2 Bare Wire Ends) |
| 878A |  |
Harness-Altemator |
| 883 |  |
Gasket-Exhaust |
| 884 |  |
Clamp-Muffler Used on Type No(s). 0128,1154. |
| 896 |  |
Pin-Drive Retainer |
| 904 |  |
Bearing-Needle |
| 917 |  |
Valve Handle-Shutoff |
| 930 |  |
Guard-Rewind |
| 945 |  |
Bracket-Starter Motor |
| 955 |  |
Plug-Carburetor (Used After Code Date 00030800). |
| 957 |  |
Cap-Fuel Tank (Plastic) |
| 958 |  |
Valve-Fuel Shutotf (Plastic) |
| 967 |  |
Filter-Pre Cleaner |
| 968 |  |
Cover-Air Cleaner |
| 971 |  |
Screw (Air Cleaner Base To Carburetor) |
| 972 |  |
Tank-Fuel (Plastic) |
| 975 |  |
Bowl-Float |
| 977 |  |
Gasket Set-Carburetor |
| 978 |  |
Gasket-Oil Gard® |
| 979 |  |
Cover-Oil Gard® |
| 980A |  |
Kit—Oil Gard® |
| 982 |  |
Screw (OIL GARD) |
| 982A |  |
Screw (OIL GARD) |
| 987 |  |
Seal-Throttle Shaft |
| 994 |  |
Arrestor-Spark |
| 1019 |  |
Kit-Label |
| 1036 |  |
Label-Emissions (Used After Code Date 00063000). |
| 1046 |  |
Plug-Blower Housing Used on Type No(s). 1139. |
| 1051 |  |
Ring-Retaining |
| 1054 |  |
Tie-Cable |
| 1058 |  |
Owner\\\'s Manual |
| 1090 |  |
Retainer-Brush |
| 1091 |  |
Cap-Limiter (Used Before Code Date 00030900). |
| 1095 |  |
Gasket Set-Valve |
| 1113 |  |
Screw (Panel) |
| 1113A |  |
Screw (Panel) |
| 1119 |  |
Screw (Alternator) |
| 1127 |  |
Screw (Float Bowl) |
| 1210 |  |
Pulley/Spring Assembly (Pulley) (Used After Code Date 98111500). |
| 1211 |  |
Pulley/Spring Assembly (Spring) (Used After Code Date 98111500). |
