| П-п | Арт | Название |
|---|---|---|
| 1 | FRONT CAP | |
| 2 | GRIP | |
| 3 | BALL HOLDER | |
| 4 | HOLDER SPRING | |
| 5 | WASHER (B) | |
| 6 | RETAINING RING FOR D20 SHAFT (10 PCS.) | |
| 7 | GEAR COVER | |
| 8 | TAPPING SCREW (W!FLANGE) D5X35 | |
| 9 | RUBBER SEAL | |
| 10 | 0 - RING (S - 30) | |
| 11 | CHANGE LEVER | |
| 12 | SPRING (C) | |
| 13 | OIL SEAL | |
| 14 | SLEEVE | |
| 15 | BALL BEARING 6904CM | |
| 16 | RETAINING RING FOR D37 HOLE | |
| 17 | STEEL BALL D7.0 (10 PCS.) | |
| 18 | STEEL BALL D5.556 (10 PCS.) | |
| 19 | CYLINDER | |
| 20 | SECOND GEAR | |
| 21 | SPRING (A) | |
| 22 | WASHER(A) | |
| 23 | RETAINING RING FOR D30 SHAFT | |
| 24 | SECOND HAMMER | |
| 25 | 0- RING (B) | |
| 26 | 0- RING (FPM 810) | |
| 27 | STRIKER | |
| 28 | 0- RING (A) | |
| 29 | PISTON | |
| 30 | PISTON PIN | |
| 31 | WASHER(C) | |
| 32 | INNER COVER | |
| 33 | SPRING (B) | |
| 34 | SECOND SHAFT | |
| 35 | WASHER (B) | |
| 36 | CLUTCH SPRING | |
| 37 | CLUTCH | |
| 38 | 0 - RING (S - 8) | |
| 39 | RECIPROCATING BEARING | |
| 40 | FIRST GEAR | |
| 41 | FEATHER KEY 3X3X8 | |
| 42 | SPACER | |
| 43 | BALL BEARING 626VVMC2ERPS2S | |
| 44 | 0 - RING (P - 22) | |
| 45 | BALL BEARING 608DDMC2EPS2S | |
| 46 | WASHER (A) | |
| 47 | ARMATURE 110V- 115V | |
| 47 | ARMATURE 120V- 127V | |
| 47 | ARMATURE 220V | |
| 47 | ARMATURE 230V- 240V | |
| 48 | FAN GUIDE ASS\\\'Y INCLUD.49 | |
| 49 | RUBBER BUSHING | |
| 50 | STATOR (C) 110V -115V | |
| 50 | STATOR (C) 120V- 127V | |
| 50 | STATOR (C) 220V- 230V | |
| 50 | STATOR (C) 230V- 240V FOR SIN.KUW.NGU.NZL,AUS,GBR (240V),SAF | |
| 51 | BALL BEARING BOBWMC2EPS2L | |
| 52 | HOUSING | |
| 53 | NAMEPLATE | |
| 54 | TAPPING SCREW (W/FLANGE) D4X20 (BLACK) | |
| 55 | HANDLE COVER | |
| 57 | REVERSING SWITCH | |
| 58 | SPEED CONTROL SWITCH ASS\\\'Y (2P)11DV- 127V INCLUD.57 | |
| 58 | SPEED CONTROL SWITCH ASS\\\'Y (2P)220V - 240V INCLUD.57 | |
| 58 | INTERNAL WIRE (B) (BLUE) FOR INA,SYR.SUR.SIN,KUW,NGU.AUS.USA,CAN, GBR | |
| 59 | INTERNAL WIRE (B) (BROWN) FOR INA.SYR.SUR.SJN,KUW.NGU,AUS,USA,CAN, GBR | |
| 70 | CORD CUP | |
| 71 | CORD ARMOR D10.2 | |
| 71 | CORD ARMOR 08.2 | |
| 72 | CORD (CORD ARMOR D10.2) | |
| 72 | CORD (CORD ARMOR D10.2) FOR EUROPE | |
| 72 | CORD (CORD ARMOR 08.2) FOR INA.SUR | |
| 72 | CORD (CORD ARMOR D10.2) FOR SYR | |
| 72 | CORD (CORD ARMOR 08.2) FOR NGU.NZL | |
| 72 | CORD (CORD ARMOR DB.2) FOR SAF | |
| 72 | CORD (CORD ARMOR 08.2) FOR SIN,KUW | |
| 72 | CORD (CORD ARMOR D10.2) FOR AUS | |
| 72 | CORD (CORD ARMOR D10.2) FOR SUI | |
| 72 | CORD (CORD ARMOR D8.2) FOR USA,CAN | |
| 72 | CORD (CORD ARMOR 08.2) FOR GBR | |
| 80 | SUPPORT(B) FOR NOISE SUPPRESSOR | |
| 81 | NOISE SUPPRESSOR | |
| 82 | EARTH TERMINAL FOR NOISE SUPPRESSOR | |
| 83 | CARBON BRUSH (AUTO STOP TYPE) (1 PAIR) | |
| 84 | BRUSH HOLDER | |
| 85 | HITACHI LABEL | |
| 87 | CHOKE COIL (A) FOR NZL.GBR.SAF.ITA.FRG.FRA,BEL,HOL,OEN, AN,SWE,AUT,NOR,ESP,SUI | |
| 88 | TUBE (D) FOR CORD | |
| 88 | CHOKE COIL (B) FOR NZL,GBR,SAF,ITA.FRG.FRA,BEL,HOL,DEN, AN,SWE,AUT,NOR,ESP,SUI | |
| 89 | TAPPING SCREW (W/FLANGE) 04X18 | |
| 501 | CASE | |
| 502 | SIDE HANDLE | |
| 503 | DEPTH GAUGE | |
| 504 | CHUCK ADAPTER (D) (SDS PLUS) FOR AUS | |
| 601 | DRILL BIT (SLENDER SHAFT) D3.4X90 | |
| 602 | DRILL BIT (SLENDER SHAFT) D3.5X90 | |
| 603 | ADAPTER FOR SLENDER SHAFT (SDS PLUS) | |
| 604 | TAPER SHANK DRILL BITD11X100 | |
| 605 | TAPER SHANK DRILL BITD12.3X110 | |
| 606 | TAPER SHANK DRILL BIT D12.7X 110 | |
| 607 | TAPER SHANK DRILL BIT D14.3X110 | |
| 608 | TAPER SHANK DRILL BIT D14.5X110 | |
| 609 | TAPER SHANK DRILL BIT D17.5X120 | |
| 610 | TAPER SHANK DRILL BIT D21.5X140 | |
| 611 | TAPER SHANK ADAPTER (SDS PLUS) N0.1 | |
| 612 | TAPER SHANK ADAPTER (SDS PLUS) N0.2 | |
| 613 | A- TAPER SHANK ADAPTER (SDS PLUS) | |
| 614 | B - TAPER SHANK ADAPTER (SDS PLUS) | |
| 615 | COTTER | |
| 616 | HAMMER DRILL CHUCK SET 13MM INCLUD.617,618 | |
| 617 | CHUCK HANDLE | |
| 618 | RUBBER CAP | |
| 619 | ANCHOR SETTING ADAPTER A ISDS+)W1/4X280l | |
| 620 | ANCHOR SETTING ADAPTER AISDS+)W5/18X280l | |
| 621 | ANCHOR SETTING ADAPTER A (S0S+)W3/8X180l | |
| 622 | ANCHOR SETTING ADAPTER A ISDS+)W3/8X280L | |
| 623 | ANCHOR SETTING ADAPTER B ISDS+)W1/4X280L | |
| 624 | ANCHOR SETTING ADAPTER 81$DS+)W5/18X280L | |
| 625 | ANCHOR SETTING ADAPTER 81SDS+)W3/8X180l | |
| 626 | ANCHOR SETTING ADAPTER B ISDS+)W3/8X280L | |
| 627 | ANCHOR SETTING ADAPTER A Wl/4\\\" (MANUAL) | |
| 628 | ANCHOR SETTING ADAPTER A W5/18\\\" (MANUAL) | |
| 629 | ANCHOR SETTING ADAPTER A W3/B\\\" (MANUAL) | |
| 630 | ANCHOR SETTING ADAPTER A Wl/2\\\" (MANUAL) | |
| 631 | ANCHOR SETTING ADAPTER A W5/B\\\" (MANUAL) | |
| 632 | ANCHOR SETTING ADAPTER B W1/4\\\" (MANUAL) | |
| 633 | ANCHOR SETTING ADAPTER B W5/18\\\" (MANUAL) | |
| 634 | ANCHOR SETTING ADAPTER B W318\\\" (MANUAL) | |
| 635 | ANCHOR SETTING ADAPTER B W1/2\\\" (MANUAL]. | |
| 636 | ANCHOR SETTING ADAPTER B W5/8\\\" (MANUAL) | |
| 637 | CENTER PIN (A) | |
| 640 | CORE BIT (A) 29MM | |
| 641 | CORE BIT (A) 32MM INCLUD.842 | |
| 642 | GUIDE PLATE (FOR CORE BIT 32MM) | |
| 643 | CORE BIT (A) 35MM INCLUD.644 | |
| 644 | GUIDE PLATE (FOR CORE BIT 35MM) | |
| 645 | CORE BIT (A) 38MM INCLUD.646 | |
| 647 | CORE BIT (B) 45MM INCLUD.648 | |
| 648 | GUIDE PLATE (FOR CORE BIT 38MM) | |
| 648 | GUIDE PLATE (FOR CORE BIT 45MM) | |
| 649 | CORE BIT (B) SOMM INCLUD.650 | |
| 650 | GUIDE PLATE (FOR CORE BIT SOMM) | |
| 651 | CORE BIT SHANK (SDS PLUS) 25- 38MM 105L | |
| 652 | CORE BIT SHANK (SDS PLUS) 25- 38MM 300L | |
| 653 | CORE BIT SHANK (SDS PLUS) 45- 90MM 300L | |
| 654 | BULL POINT (SOS+) 250MM(ROUND SHANK TYPE) | |
| 655 | CHEMICAL ANCHOR ADAPTER (SDS+)12.7MMXSIOL | |
| 656 | CHEMICAL ANCHOR ADAPTER(SDS+)18.0MMX100L | |
| 657 | DRILL CHUCK AND ADAPTER SET (SDS PLUS) 1 INCLUD.658,861 | |
| 658 | DRILL CHUCK 13VLR INCLUD.859,860 | |
| 659 | CHUCK WRENCH 1OG | |
| 660 | SPECIAL SCREW M6X22 | |
| 661 | CHUCK ADAPTER (G) (SDS PLUS) | |
| 662 | DRILL CHUCK 13VLA INCLUD.859 | |
| 663 | CHUCK ADAPTER (D) (SDS PLUS) | |
| 664 | + DRIVER BIT (A) N0.2 25L | |
| 670 | GREASE FOR HAMMER.HAMMER DRILL (70G) | |
| 671 | GREASE {A) FOR HAMMER.HAMMER DRILL {30G) | |
| 672 | SILICON RUBBER | |
| 685 | + DRIVER BIT (A) N0.3 25L | |
| 838 | CENTER PIN (B) | |
| 839 | CORE BIT (A) 25MM | |
| 866 | DUST CUP | |
| 867 | DUST COLLECTOR (B) ASS\\\'Y INCLUD.668 | |
| 868 | SOCKET ADAPTOR (B) | |
| 869 | GREASE FOR HAMMER.HAMMER DRILL (SOOG) |
