Главная/
Каталог запчастей/
S/
SIMPLICITY/
Снегоуборщики/
I7524EX (7800087)/
Handles & Controls Group (s070uhdc)
Handles & Controls Group (s070uhdc)
| П-п | Арт | Название |
|---|---|---|
| 1 |  |
NUT, 5/16-18 Hex Nyloc-or 1919438, 5/16-18 Hex Nyloc (light) |
| 2 |  |
BRACKET, Snow Stick- Lower |
| 3 |  |
SCREW, 5/16-18 x 3/4\\\" Hex Head Cap-or 7091318 |
| 4 |  |
CLUTCH CABLE, Auger Drive- RH-part number is stamped on cable |
| 5 |  |
HANDLE, Upper, Right Hand |
| 6 |  |
GRIP, Clutch, RH |
| 7 |  |
GRIP, Foam, Black |
| 8 |  |
HAIR PIN |
| 9 |  |
ROD, Shift, Lower |
| 10 |  |
NUT, 1/4-20 2B Hex |
| 11 |  |
LOCKWASHER, 1/4\\\" Spring |
| 12 |  |
BOLT, 1/4-20 x 2\\\" Short Square Neck Carriage, GR 5 |
| 13 |  |
ROD, Upper, Shift |
| 14 |  |
BLOCK, Pivot |
| 15 |  |
WELDMENT, Shift Rod Pivot |
| 16 | SPRING, Torsion | |
| 17 | COTTER PIN, .125 x 1.00 | |
| 18 | BUSHING, .500 ID x .750 OD x .25 | |
| 19 | WASHER, 1/2\\\" Flat (.531 ID x 1.250 OD x .08 Thick) | |
| 20 | WELDMENT, Shift Rod | |
| 21 | SCREW, 1/4-20 x 2-1/4\\\" Hex Flange Lock | |
| 22 | WASHER, .250 (.27 ID x .62 OD) | |
| 23 | KNOB, Tapered - 3/8-16 Internal Thread- Red | |
| 24 | WELDMENT, Dash | |
| 25 | HANDLE, Lower | |
| 26 | WING KNOB, 5/16-18 | |
| 27 | WASHER, 5/16\\\" Internal Tooth Lock | |
| 28 | NUT, 5/16-18 Hex Flange Nyloc | |
| 29 | WASHER, 5/16-or 7014098 | |
| 30 | ASSEMBLY, Rod w/Pin-includes items 31, 47, 54, 55 & 56. | |
| 31 | SPRING, Compression | |
| 32 | PUSH NUT | |
| 33 | ROD, Hold Down | |
| 34 | SCREW, 1/4-20 x 2\\\" Hex Head Cap, GR 5 | |
| 35 | GRIP, Clutch, LH | |
| 36 | NUT, 1/4-20 Hex Centerlock | |
| 37 | SPACER, Handle | |
| 38 | HANDLE, Upper, Left Hand | |
| 39 | SCREW, 1/4-20 x 1-1/2\\\" Hex Head Cap | |
| 40 | SPACER, .268 ID x .394 x .165 | |
| 41 | SCREW, 1/4-20 x 3/4\\\" Pan Head Torx Self-Tap | |
| 42 | SCREW, 5/16-18 x 1-1/2\\\" Hex Head Cap, GR 5-or 7091540 | |
| 43 | LEVER, Pivot | |
| 44 | NUT, 1/4-20 Hex Nyloc-or 960694 | |
| 45A | SNOW STICK | |
| 45B | SNOW STICK w/Brush | |
| 46 | NUT, #10-24 Hex Center Lock | |
| 47 | ROD, Hand Control-Not a shown part, Part of ref #30 | |
| 48 | HOLDER, Snostik- Upper | |
| 49 | CLUTCH CABLE, Ground Drive- LH-part number is stamped on cable | |
| 50 | BOLT, 5/16-18 x 2\\\" Curved Head Square Neck GR 2 | |
| 51 | WASHER, #10 Internal Tooth Lock | |
| 52 | SCREW, #10-24 x 2\\\" Hex Washer Head Machine, GR 5-or 7091757 (SCREW, #10-24 x 1-1/4” Hex Head Cap) | |
| 53 | LOCKWASHER, Spring .312-or 1717312 (5/16” Curved Washer) | |
| 54 | BUSHING, .250 ID x .375 OD x .750-Not a shown part, Part of ref #30 | |
| 55 | PIN, Clevis-Not a shown part, Part of ref #30 | |
| 56 | SPRING, Compression-Not a shown part, Part of ref #30 |
