Главная/
Каталог запчастей/
H/
HITACHI/
Электроинструмент/
Деревообработка/
Фрезеровальные машины/
M12SA
M12SA
| П-п | Арт | Название |
|---|---|---|
| 1 | TAPPING SCREW (W/WASHER) D4X25 | |
| 2 | TOP COVER (A) | |
| 3 | TAPPING SCREW D4X12 | |
| 4 | BEARING BUSHING | |
| 5 | BALL BEARING 6200VVCMPS2L | |
| 6 | HEX. SOCKET SET SCREW M5X8 | |
| 7 | TAPPING SCREW (W/WASHER) D4X16 | |
| 8 | KNOB PINION | |
| 9 | WING BOLT M6X27 | |
| 10 | FRONT COVER | |
| 11 | SCALE (MM) | |
| 11 | SCALE (INCH) | |
| 12 | SCALE STOPPER | |
| 13A | HITACHI LABEL | |
| 14 | STATOR ASS\\\'Y 110V-115V INCLUD.31 | |
| 14 | STATOR ASS\\\'Y 127V INCLUD.31 | |
| 14 | STATOR ASS\\\'Y 220V-230V INCLUD.31 | |
| 14 | STATOR ASS\\\'Y 230V-240V INCLUD.31 FOR AUS,KUW,FIJ,NGU | |
| 14 | STATOR ASS\\\'Y 220V-230V INCLUD.31 FOR NZL,ITA,FRG,HOL,DEN,ESP,GBR | |
| 14 | STATOR ASS\\\'Y 220V-230V INCLUD.31 FOR SAF,SWE,AUT,NOR | |
| 14 | STATOR ASS\\\'Y 110V INCLUD.31 FOR GBR | |
| 14 | STATOR ASS\\\'Y 100V INCLUD.31 FOR KOR | |
| 15 | HEX. HD. TAPPING SCREW D5X70 | |
| 16 | ARMATURE 127V | |
| 16 | ARMATURE 220V-230V | |
| 16 | ARMATURE 240V | |
| 16A | ARMATURE ASS\\\'Y 110V-115V INCLUD.5,49 | |
| 17 | TERMINAL FOR NOISE SUPPRESSOR | |
| 18 | TUBE (D) FOR NOISE SUPPRESSOR | |
| 19 | NOISE SUPPRESSOR | |
| 20 | TUBE (D) FOR CORD | |
| 21 | CORD CLIP | |
| 22 | TAPPING SCREW (W/FLANGE) D4X16 | |
| 23 | CORD ARMOR D8.8 | |
| 23 | CORD ARMOR D10.1 | |
| 24 | CORD (CORD ARMOR D10.1) | |
| 24 | CORD (CORD ARMOR D10.1) FOR SWE,NOR | |
| 24 | CORD (CORD ARMOR D10.1) FOR SUI | |
| 24 | CORD (CORD ARMOR D8.8) FOR ITA,FRG,HOL,DEN,AUT,INA,SUR,FRA,GRE | |
| 24 | CORD (CORD ARMOR D10.1) FOR USA,CAN | |
| 24 | CORD (CORD ARMOR D8.8) FOR NGU,NZL,FIG,AUS | |
| 24 | CORD (CORD ARMOR D8.8) FOR SAF | |
| 24 |  |
CORD (CORD ARMOR D10.1) FOR GBR (110V) |
| 24 |  |
CORD (CORD ARMOR D8.8) FOR SAU,SIN,KUW |
| 24 |  |
CORD (CORD ARMOR D10.1) FOR KOR |
| 24A |  |
CORD (CORD ARMOR D8.8) FOR GBR (240V) |
| 24A |  |
CORD (CORD ARMOR D8.8) FOR SYR |
| 25 |  |
SWITCH (2P PILLAR TYPE) W/O LOCK |
| 26 |  |
BRUSH HOLDER |
| 26 |  |
BRUSH HOLDER FOR AUT |
| 27 |  |
CARBON BRUSH (1 PAIR) |
| 28 |  |
BRUSH CAP |
| 28 |  |
BRUSH CAP FOR AUT |
| 29 |  |
NAME PLATE |
| 30A |  |
HOUSING ASS\\\'Y INCLUD.6,26,64 |
| 30A |  |
HOUSING ASS\\\'Y INCLUD.6,26,64 FOR AUT |
| 31 |  |
BRUSH TERMINAL |
| 32 |  |
LEVER |
| 33 |  |
MACHINE SCREW (W/WASHERS) M5X25 |
| 34 |  |
HANDLE |
| 35 |  |
STOPPER PIECE |
| 36 |  |
STOPPER POLE |
| 38 |  |
WING BOLT M6X15 |
| 39A |  |
END BRACKET (A) |
| 40A |  |
TAPPING SCREW D5X50 |
| 41 |  |
SELF TAPPING SCREW (W/WASHER) D4X12 |
| 42 |  |
SPRING (A) |
| 43A |  |
STOPPER BLOCK |
| 44 |  |
NUT M5 (BLACK) |
| 45 |  |
MACHINE SCREW M5X20 (BLACK) |
| 46 |  |
MACHINE SCREW M5X35 (BLACK) |
| 47 |  |
SEAL LOCK FLAT HD. SCREW M4X10 |
| 48 |  |
BEARING COVER |
| 49 |  |
BALL BEARING 6201VVCMPS2L |
| 50 |  |
LOCK PIECE |
| 51 |  |
RETAINING RING (E-TYPE) FOR D10 SHAFT |
| 52 |  |
LOCK SCREW |
| 53 |  |
WAVE WASHER |
| 54 |  |
LOCK LEVER |
| 55 |  |
SPRING |
| 56 |  |
LOCK PLATE |
| 57 |  |
SCREW M8 |
| 58 |  |
COLLET CHUCK 1/2\\\" |
| 58A |  |
COLLET CHUCK 12MM |
| 59A |  |
BASE (TILL 9.1999 EXCEPT FOR USA,CAN) |
| 59B |  |
BASE (SINCE 10.1999 EXCEPT FOR USA,CAN) |
| 60 |  |
SUB BASE |
| 61 |  |
SEAL LOCK FLAT HD. SCREW M5X14 |
| 62 |  |
SPRING |
| 63 |  |
SPRING |
| 64 |  |
SPRING GUIDE |
| 65 |  |
BELLOWS (A) (SINCE 10.1999 EXCEPT FOR USA,CAN) |
| 501 |  |
WRENCH 21MM |
| 502 | MACHINE SCREW M5X6 (10 PCS.) | |
| 503 | BAR HOLDER EXCEPT FOR FRA,SUI,GBR,CAN,HOL | |
| 504 | WING BOLT M6X10 (10 PCS.) EXCEPT FOR FRA,SUI,GBR,CAN,HOL | |
| 505 | FEED SCREW EXCEPT FOR FRA,SUI,GBR,CAN,HOL | |
| 506 | STRAIGHT GUIDE EXCEPT FOR FRA,SUI,GBR,CAN,HOL | |
| 506 | STRAIGHT GUIDE (A) ASS\\\'Y INCLUD.507-514 FOR FRA,SUI,GBR,HOL | |
| 507 | GUIDE BAR FOR FRA,SUI,GBR,HOL | |
| 508 | RETAINING RING (E-TYPE) FOR D5 SHAFT FOR FRA,SUI,GBR,HOL | |
| 509 | STRAIGHT GUIDE (A) FOR FRA,SUI,GBR,HOL | |
| 510 | KNOB BOLT M6X7 FOR FRA,SUI,GBR,HOL | |
| 511 | SCREW HOLDER FOR FRA,SUI,GBR,HOL | |
| 512 | FEED SCREW (A) FOR FRA,SUI,GBR,HOL | |
| 513 | KNOB BOLT M6X17 FOR FRA,SUI,GBR,HOL | |
| 514 | LOCK SPRING FOR FRA,SUI,GBR,HOL | |
| 515 | TEMPLATE GUIDE D18 | |
| 516 | TEMPLATE GUIDE ADAPTER | |
| 517 | LOCK SPRING | |
| 518 | CHUCK SLEEVE 12X6 | |
| 518 | CHUCK SLEEVE 12X8 | |
| 518 | CHUCK SLEEVE 12X3/8\\\" | |
| 518 | CHUCK SLEEVE 1/2\\\"X1/4\\\" | |
| 518 | CHUCK SLEEVE 1/2\\\"X3/8\\\" | |
| 518 | CHUCK SLEEVE 12X10 FOR FRA | |
| 518 | CHUCK SLEEVE 12X1/4\\\" FOR FRA | |
| 519A | STRAIGHT BIT (TCT) D1/2\\\"X1/2\\\" FOR COLLET CHUCK 1/2\\\" | |
| 519A | STRAIGHT BIT (TCT) D8X8 | |
| 520 | WING BOLT M6X15 | |
| 521 | ADJUSTING KNOB SET INCLUD.522-525 FOR FRG,BEL,AUS,NZL | |
| 522 | SQUARE NUT | |
| 523 | SLEEVE | |
| 524 | WASHER (B) | |
| 525 | SPRING (A) | |
| 526 | DUST COLLECTION ADAPTER SET INCLUD.527,528 FOR FRG,BEL,ESP,ITA | |
| 527 | KNOB NUT | |
| 528 | MACHINE SCREW M5X12 (10 PCS.) |
