Главная/
Каталог запчастей/
H/
HITACHI/
Электроинструмент/
Отбойные молотки/
H45MA/
H45MA Деталировка
H45MA Деталировка
| П-п | Арт | Название |
|---|---|---|
| 1 | FRONT CAP | |
| 2 | GRIP (A) | |
| 3 | RING | |
| 4 | WASHER (D) | |
| 5 | WASHER (C) | |
| 6 | RETAINER DAMPER | |
| 7 | NEEDLE HOLDER (A) | |
| 8 | NEEDLE | |
| 9 | NEEDLE HOLDER (B) | |
| 10 | SPRING (A) | |
| 11 | S TYPE RETAINING RING | |
| 12 | BALL HOLDER | |
| 13 | GRIP (B) | |
| 14 | SPRING (B) | |
| 15 | STEEL BALL D6.35 (10 PCS.) | |
| 16 | NYLOCK HIGH TENSION BOLT M7X25 | |
| 17 | FRONT COVER | |
| 18 | RETAINER SLEEVE | |
| 19 | O - RING (S - 26) | |
| 20 | X - RING | |
| 21 | SECOND HAMMER | |
| 22 | HAMMER HOLDER | |
| 23 | DAMPER | |
| 24 | WASHER | |
| 25 | O - RING (S - 42) | |
| 26 | CYLINDER CASE ASS’Y (INCLUD.28) | |
| 27 | NYLOCK BOLT (W/FLANGE) M6X25 | |
| 28 | CYLINDER | |
| 29 | O - RING (S - 48) | |
| 30 | STRIKER | |
| 31 | O - RING | |
| 32 | PISTON PIN | |
| 33 | PISTON | |
| 34 | RETAINING RING FOR D10 SHAFT (10 PCS.) | |
| 35 | CONNECTING ROD | |
| 36 | SEAL LOCK HEX. SOCKET HD. BOLT M4X12 | |
| 37 | CRANK COVER | |
| 38 | O - RING (S - 55) | |
| 39 | CRANKSHAFT | |
| 40 | FEATHER KEY 4X4X10 | |
| 41 | RETAINING RING FOR D40 HOLE | |
| 42 | BALL BEARING 6203DDUCMAV2S | |
| 43 | O - RING (S - 40) | |
| 44 | OIL SEAL | |
| 45 | NAME PLATE | |
| 46 | CRANK CASE | |
| 47 | HANDLE DAMPER | |
| 48 | TRANSATORY UNIT | |
| 49 | HANDLE PACKING (A) | |
| 50 | FIRST GEAR | |
| 51 | HITACHI LABEL | |
| 52 | NEEDLE BEARING (M661) | |
| 53 | GEAR COVER ASS Y (INCLUD.52) | |
| 54 | BALL BEARING 6201VVCMPS2S | |
| 55 | WASHER (B) | |
| 56 | SIDE HANDLE | |
| 57 | SPRING | |
| 58 | HANDLE HOLDER ASS Y (INCLUD.59 - 61) | |
| 59 | HANDLE HOLDER (B) | |
| 60 | HANDLE HOLDER (A) | |
| 61 | ROLL PIN D6X22 (10 PCS.) | |
| 62 | HANDLE BOLT | |
| 63 | FAN | |
| 64 | ARMATURE ASS Y 110V - 1 15V (INCLUD.54,55,63,70,71) | |
| 64 | ARMATURE ASS Y 220V - 230V (INCLUD.63) | |
| 64 | ARMATURE ASS’Y 240V (INCLUD.63) | |
| 65 | FAN GUIDE | |
| 66 | HEX. HD. TAPPING SCREW D5X50 | |
| 67 | STATOR ASS’Y (B) 110V (INCLUD.68) | |
| 67 | STATOR ASS Y 115V (INCLUD.68,69) | |
| 67 | STATOR ASS Y (B) 220V - 230V (INCLUD.68) | |
| 67 | STATOR ASS’Y 240V (INCLUD.68,69) | |
| 68 | BRUSH TERMINAL | |
| 69 | TERMINAL M4.0 (10 PCS.) | |
| 70 | WASHER (A) | |
| 71 | BALL BEARING 608VVMC2EPS2L | |
| 72 | HOUSING ASS Y (INCLUD.76,77) | |
| 73 | HEX. SOCKET HD. BOLT (W/FLANGE) M5X45 | |
| 74 | BRUSH CAP | |
| 75 | CARBON BRUSH (AUTO STOP TYPE) (1 PAIR) | |
| 76 | BRUSH HOLDER | |
| 77 | HEX. SOCKET SET SCREW M5X8 | |
| 78 | BEARING BUSHING (B) | |
| 79 | TAIL COVER ASS Y (INCLUD.80) | |
| 80 | PLATE | |
| 81 | TAPPING SCREW (W/FLANGE) D4X16 (BLACK) | |
| 82 | VINYL TUBE (ID7XT0.5X30) (FOR USA,CAN) | |
| 83 | INTERNAL WIRE HOLDER | |
| 83 | INTERNAL WIRE HOLDER (FOR AUS,USA,CAN) | |
| 84 | HANDLE PACKING (B) | |
| 85 | TAPPING SCREW (W/WASHER) D5X20 | |
| 86 | SEAL LOCK HEX. SOCKET HD. BOLT M5X12 | |
| 87 | DISTANCE PIECE (B) | |
| 88 | HANDLE (B) | |
| 89 | INTERNAL WIRE (EXCEPT AUS,USA,CAN) | |
| 90 | CONNECTOR 50091 (10 PCS.) (EXCEPT AUS,USA,CAN) | |
| 91 | NOISE SUPPRESSOR (EXCEPT AUS,USA,CAN) | |
| 92 | SUPPORT (B) (FOR NOISE SUPPRESSOR) | |
| 93 | INTERNAL WIRE (EXCEPT AUS,USA,CAN) | |
| 94 | SWITCH (B) (1P SCREW TYPE) W/LOCK | |
| 95 | HANDLE (A) | |
| 96 | PILLAR TERMINAL (EXCEPT AUS) | |
| 97 | TAPPING SCREW (W/FLANGE) D4X25 (BLACK) | |
| 98 | SDS MAX LABEL | |
| 99 | CONNECTOR 50092 (10 PCS.) (EXCEPT USA,CAN) | |
| 100 | CORD ARMOR D8.8 | |
| 100 | CORD ARMOR D10.1 | |
| 101 | TERMINAL M4.0 (10 PCS.) | |
| 101 | TERMINAL (EXCEPT SAF) | |
| 101 | TERMINAL (FOR GBR(110V),AUS) | |
| 102 | WASHER M4 (10 PCS.) (EXCEPT AUS,USA,CAN) | |
| 103 | TAPPING SCREW (W/FLANGE) D4X16 | |
| 104 | CORD CLIP | |
| 104 | CORD CLIP (FOR SUI) | |
| 105 | CORD ((CORD ARMOR D10.1)) | |
| 105 | CORD ((CORD ARMOR D8.8) FOR GBR(110V)) | |
| 105 | CORD ((CORD ARMOR D10.1) FOR GBR(230V)) | |
| 105 | CORD ((CORD ARMOR D10.1) FOR AUS) | |
| 105 | CORD ((CORD ARMOR D8.8) FOR SAF) | |
| 105 | CORD ((CORD ARMOR D10.1) FOR SUI) | |
| 105 | CORD ((CORD ARMOR D10.1) FOR USA,CAN) | |
| 501 | BULL POINT (SDS MAX) 280L | |
| 502 | HEX. BAR WRENCH 3MM (EXCEPT USA,CAN) | |
| 503 | HEX. BAR WRENCH 4MM | |
| 504 | HEX. BAR WRENCH 5MM | |
| 505 | CASE | |
| 601 | BULL POINT (SDS MAX) 400L | |
| 602 | COLD CHISEL (SDS MAX) 280MM | |
| 603 | COLD CHISEL (SDS MAX) 400MM | |
| 604 | CUTTER (SDS MAX) W50X400L | |
| 605 | SCOOP (SDS MAX) 400L | |
| 606 | RAMMER (SDS MAX) 150MM X 150MM | |
| 607 | BUSHING TOOL (SDDS MAX) | |
| 608 | SHANK (SDS MAX)FOR RAMMER, BUSHING TOOL | |
| 609 | GREASE (A) FOR HAMMER.HAMMER DRILL (30G) | |
| 610 | GREASE FOR HAMMER.HAMMER DRILL (70G) | |
| 61 1 | GREASE FOR HAMMER,HAMMER DRILL (500G) (EXCEPT USA,CAN) |
